Filkemp

Premium Portuguese industrial biopolymers; PLN engineering specialty

Tier A-

Filkemp sits at Tier A- - a strong overall pick with tight quality control and a few minor caveats versus pure Tier A brands. We rate them this way because of volkswagen autoeuropa industrial tooling case study and tct coverage document years of reliable plan/pln use in production fixtures and hobbyist community volume is thin; reputation is industrial rather than mainstream maker qc. Materials available from Filkemp include PLN, PLA, PETG, Nylon, and PLA 883P. In day-to-day printing, Filkemp stands out for: pln biopolymer substitutes abs after annealing with lower voc emissions. Spools typically run $30-$45 per kilogram.

Why Tier A-?

  • Volkswagen Autoeuropa industrial tooling case study and TCT coverage document years of reliable PLAN/PLN use in production fixtures
  • Hobbyist community volume is thin; reputation is industrial rather than mainstream maker QC

Pros

  • Portuguese manufacturer since 1952 with ISO-certified industrial extrusion
  • PLN biopolymer substitutes ABS after annealing with lower VOC emissions
  • VW Autoeuropa validated PLAN in painting ovens to 140C over 50 cycles
  • Exclusive lubrication technology for continuous low-moisture nylon printing

Cons

  • Looser +/-0.05mm tolerance on 1.75mm PLN versus premium hobby brands
  • Limited maker-community reviews outside Portugal and industrial press
  • Annealing required for full PLN heat resistance

Additional Notes

  • PLN (PLA 881N) is the signature engineering line; strong for tooling and ABS replacement

Filkemp Filament FAQ

What materials does Filkemp make?

Filkemp produces filament in the following materials: PLN, PLA, PETG, Nylon, PLA 883P. Each material is suited to different print applications - check our material database for printing temperatures and specs.

What tier is Filkemp filament rated?

Filkemp is rated Tier A- by Filament Cheat Sheet because of volkswagen autoeuropa industrial tooling case study and tct coverage document years of reliable plan/pln use in production fixtures and hobbyist community volume is thin; reputation is industrial rather than mainstream maker qc.

Is Filkemp good for beginners?

Yes - Filkemp is a strong choice for beginners thanks to consistent quality and reliable printing behavior, though pricing is on the higher end.

What are the pros and cons of Filkemp filament?

Pros of Filkemp: Portuguese manufacturer since 1952 with ISO-certified industrial extrusion; PLN biopolymer substitutes ABS after annealing with lower VOC emissions; VW Autoeuropa validated PLAN in painting ovens to 140C over 50 cycles; Exclusive lubrication technology for continuous low-moisture nylon printing. Considerations: Looser +/-0.05mm tolerance on 1.75mm PLN versus premium hobby brands; Limited maker-community reviews outside Portugal and industrial press; Annealing required for full PLN heat resistance.

How much does Filkemp filament cost?

Filkemp filament typically costs between $30 and $45 per kilogram, depending on the material and color. Specialty composite or engineering-grade materials sit at the upper end of that range.

Where can I buy Filkemp filament?

Filkemp filament is sold directly through 3D Filkemp at https://3dfilkemp.com/. It is not generally stocked on Amazon.