addnorth Adura X vs ASA
Compare addnorth Adura X and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
addnorth Adura X
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
addnorth Adura X
ASA
Tier Rating
Tier null
Tier A
Family
Specialty
ASA
Nozzle Temp
270°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
addnorth Adura X Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
addnorth Adura X Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is addnorth Adura X or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to addnorth Adura X (Tier null). However, the best choice depends on your specific needs: addnorth Adura X is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between addnorth Adura X and ASA?
addnorth Adura X prints at 270°C nozzle / 60°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do addnorth Adura X and ASA need an enclosure?
addnorth Adura X: not needed. ASA: recommended.
Which is more beginner-friendly: addnorth Adura X or ASA?
addnorth Adura X is more beginner-friendly as it doesn't require an enclosure.