ColorFabb BronzeFill vs ASA

Compare ColorFabb BronzeFill and ASA filaments side-by-side so you can pick the right one for your 3D printing project.

ColorFabb BronzeFill vs ASA: ColorFabb BronzeFill is known for general use, while ASA is known for excellent uv resistance (outdoors indefinitely). ColorFabb BronzeFill is easier to print; ASA prints at higher nozzle temperatures (220-275°C vs 210°C). Choose ColorFabb BronzeFill for general use, or ASA for excellent uv resistance (outdoors indefinitely).

Key differences at a glance

Property
ColorFabb BronzeFill
ASA
Nozzle temp
210°C
220-275°C
Bed temp
60°C
90-110°C
Enclosure needed
No
Recommended
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

ColorFabb BronzeFill

-

Versatile 3D printing filament

ASA

A

Acrylonitrile Styrene Acrylate

Excellent UV resistance (outdoors indefinitely), tough, matte surface

Detailed Comparison

Property
ColorFabb BronzeFill
ASA
Tier Rating
Tier null
Tier A
Family
Specialty
ASA
Nozzle Temp
210°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

ColorFabb BronzeFill Strengths

    ASA Strengths

    • Excellent UV resistance (outdoors indefinitely), tough, matte surface
    • Less warping than ABS; low viscosity enables very high speed printing
    • High heat tolerance (~boiling water range)

    Considerations

    ColorFabb BronzeFill Caveats

      ASA Caveats

      • Still off-gasses; enclosure/ventilation recommended
      • Can still warp; needs tuning

      Frequently Asked Questions

      What is the difference between ColorFabb BronzeFill and ASA?
      ColorFabb BronzeFill prints at 210°C nozzle / 60°C bed (No enclosure, low moisture sensitivity). ASA prints at 220-275°C nozzle / 90-110°C bed (Recommended enclosure, moderate moisture sensitivity).
      Is ColorFabb BronzeFill or ASA stronger?
      Our dataset does not include comparable tensile strength values for both. Qualitatively, ColorFabb BronzeFill is suited to , while ASA is suited to excellent uv resistance (outdoors indefinitely).
      Which prints at a higher temperature, ColorFabb BronzeFill or ASA?
      ASA prints at a higher temperature (220-275°C nozzle vs 210°C for ColorFabb BronzeFill).
      Is ColorFabb BronzeFill or ASA better for beginners?
      ColorFabb BronzeFill is better for beginners: enclosure is no and moisture sensitivity is low, vs recommended enclosure and moderate moisture for ASA.
      Should I use ColorFabb BronzeFill or ASA for outdoor use?
      For outdoor use, ASA is usually the better fit (Excellent UV resistance (outdoors indefinitely)). Choose ColorFabb BronzeFill instead when .

      Other Popular Comparisons

      PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG