ColorFabb CorkFill vs PLA
Compare ColorFabb CorkFill and PLA filaments side-by-side. See which one is best for your 3D printing project.
ColorFabb CorkFill
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
ColorFabb CorkFill
PLA
Tier Rating
Tier null
Tier A
Family
Specialty
PLA
Nozzle Temp
220°C
185-235°C
Bed Temp
60°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Strengths Comparison
ColorFabb CorkFill Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
ColorFabb CorkFill Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is ColorFabb CorkFill or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to ColorFabb CorkFill (Tier null). However, the best choice depends on your specific needs: ColorFabb CorkFill is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between ColorFabb CorkFill and PLA?
ColorFabb CorkFill prints at 220°C nozzle / 60°C bed. PLA prints at 185-235°C nozzle / 50-60°C bed.
Do ColorFabb CorkFill and PLA need an enclosure?
ColorFabb CorkFill: not needed. PLA: not needed.
Which is more beginner-friendly: ColorFabb CorkFill or PLA?
Both ColorFabb CorkFill and PLA are beginner-friendly options.