ColorFabb nGen vs PLA
Compare ColorFabb nGen and PLA filaments side-by-side. See which one is best for your 3D printing project.
ColorFabb nGen
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
ColorFabb nGen
PLA
Tier Rating
Tier null
Tier A
Family
nGen
PLA
Nozzle Temp
240°C
185-235°C
Bed Temp
90°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Strengths Comparison
ColorFabb nGen Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
ColorFabb nGen Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is ColorFabb nGen or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to ColorFabb nGen (Tier null). However, the best choice depends on your specific needs: ColorFabb nGen is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between ColorFabb nGen and PLA?
ColorFabb nGen prints at 240°C nozzle / 90°C bed. PLA prints at 185-235°C nozzle / 50-60°C bed.
Do ColorFabb nGen and PLA need an enclosure?
ColorFabb nGen: not needed. PLA: not needed.
Which is more beginner-friendly: ColorFabb nGen or PLA?
Both ColorFabb nGen and PLA are beginner-friendly options.