ColorFabb WoodFill vs PLA
Compare ColorFabb WoodFill and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
ColorFabb WoodFill
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
ColorFabb WoodFill
PLA
Tier Rating
Tier null
Tier A
Family
Specialty
PLA
Nozzle Temp
200°C
190-220°C
Bed Temp
60°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
ColorFabb WoodFill Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
ColorFabb WoodFill Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is ColorFabb WoodFill or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to ColorFabb WoodFill (Tier null). However, the best choice depends on your specific needs: ColorFabb WoodFill is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between ColorFabb WoodFill and PLA?
ColorFabb WoodFill prints at 200°C nozzle / 60°C bed. PLA prints at 190-220°C nozzle / 50-60°C bed.
Do ColorFabb WoodFill and PLA need an enclosure?
ColorFabb WoodFill: not needed. PLA: not needed.
Which is more beginner-friendly: ColorFabb WoodFill or PLA?
Both ColorFabb WoodFill and PLA are beginner-friendly options.