Das Filament PLA vs PLA
Compare Das Filament PLA and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Das Filament PLA vs PLA: Das Filament PLA is known for easiest to print, while PLA is known for easiest to print. Both have no enclosure requirements; Das Filament PLA is less moisture-sensitive; Das Filament PLA prints at higher nozzle temperatures (210°C vs 190-220°C). Choose Das Filament PLA for easiest to print, or PLA for easiest to print.
Key differences at a glance
Das Filament PLA
-Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Das Filament PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Das Filament PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups