E3D Edge vs PETG
Compare E3D Edge and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
E3D Edge vs PETG: E3D Edge is known for tougher than pla, while PETG is known for tougher than pla. E3D Edge is easier to print. Choose E3D Edge for tougher than pla, or PETG for tougher than pla.
Key differences at a glance
Property
E3D Edge
PETG
Nozzle temp
240°C
230-250°C
Bed temp
90°C
70-90°C
Enclosure needed
No
Optional
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate
E3D Edge
-Tougher than PLA, higher temp tolerance, more durable in real-world use
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Property
E3D Edge
PETG
Tier Rating
Tier null
Tier A
Family
PETG
PETG
Nozzle Temp
240°C
230-250°C
Bed Temp
90°C
70-90°C
Enclosure
not needed
optional
Cooling
Moderate cooling; too much cooling can hurt layer adhesion
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
E3D Edge Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
E3D Edge Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly
Frequently Asked Questions
What is the difference between E3D Edge and PETG?
E3D Edge prints at 240°C nozzle / 90°C bed (No enclosure, low moisture sensitivity). PETG prints at 230-250°C nozzle / 70-90°C bed (Optional enclosure, moderate moisture sensitivity).
Is E3D Edge or PETG stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, E3D Edge is suited to tougher than pla, while PETG is suited to tougher than pla.
Which prints at a higher temperature, E3D Edge or PETG?
Both print at similar nozzle temperatures (240°C vs 230-250°C).
Is E3D Edge or PETG better for beginners?
E3D Edge is better for beginners: enclosure is no and moisture sensitivity is low, vs optional enclosure and moderate moisture for PETG.
Should I use E3D Edge or PETG for tougher than pla?
For tougher than pla, E3D Edge is usually the better fit (Tougher than PLA). Choose PETG instead when tougher than pla.