EUMAKERS PLA vs ASA
Compare EUMAKERS PLA and ASA filaments side-by-side. See which one is best for your 3D printing project.
EUMAKERS PLA
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
EUMAKERS PLA
ASA
Tier Rating
Tier null
Tier A
Family
PLA
ASA
Nozzle Temp
210°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
EUMAKERS PLA Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
EUMAKERS PLA Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is EUMAKERS PLA or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to EUMAKERS PLA (Tier null). However, the best choice depends on your specific needs: EUMAKERS PLA is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between EUMAKERS PLA and ASA?
EUMAKERS PLA prints at 210°C nozzle / 60°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do EUMAKERS PLA and ASA need an enclosure?
EUMAKERS PLA: not needed. ASA: recommended.
Which is more beginner-friendly: EUMAKERS PLA or ASA?
EUMAKERS PLA is more beginner-friendly as it doesn't require an enclosure.