Extrudr BioFusion vs PLA
Compare Extrudr BioFusion and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Extrudr BioFusion vs PLA: Extrudr BioFusion is known for easiest to print, while PLA is known for easiest to print. Both have no enclosure requirements; Extrudr BioFusion is less moisture-sensitive; Extrudr BioFusion prints at higher nozzle temperatures (220°C vs 190-220°C). Choose Extrudr BioFusion for easiest to print, or PLA for easiest to print.
Key differences at a glance
Extrudr BioFusion
-Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Extrudr BioFusion Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Extrudr BioFusion Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups