Extrudr GreenTEC Pro vs ASA
Compare Extrudr GreenTEC Pro and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
Extrudr GreenTEC Pro vs ASA: Extrudr GreenTEC Pro is known for easiest to print, while ASA is known for excellent uv resistance (outdoors indefinitely). Extrudr GreenTEC Pro is easier to print; ASA prints at higher nozzle temperatures (220-275°C vs 215°C). Choose Extrudr GreenTEC Pro for easiest to print, or ASA for excellent uv resistance (outdoors indefinitely).
Key differences at a glance
Extrudr GreenTEC Pro
-Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Extrudr GreenTEC Pro Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Extrudr GreenTEC Pro Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning