Extrudr GreenTEC Pro vs PLA
Compare Extrudr GreenTEC Pro and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Extrudr GreenTEC Pro vs PLA: Extrudr GreenTEC Pro is known for easiest to print, while PLA is known for easiest to print. Both have no enclosure requirements; Extrudr GreenTEC Pro is less moisture-sensitive; Extrudr GreenTEC Pro prints at higher nozzle temperatures (215°C vs 190-220°C). Choose Extrudr GreenTEC Pro for easiest to print, or PLA for easiest to print.
Key differences at a glance
Extrudr GreenTEC Pro
-Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Extrudr GreenTEC Pro Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Extrudr GreenTEC Pro Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups