Extrudr GreenTEC vs ASA

Compare Extrudr GreenTEC and ASA filaments side-by-side so you can pick the right one for your 3D printing project.

Extrudr GreenTEC vs ASA: Extrudr GreenTEC is known for easiest to print, while ASA is known for excellent uv resistance (outdoors indefinitely). Extrudr GreenTEC is easier to print; ASA prints at higher nozzle temperatures (220-275°C vs 208°C). Choose Extrudr GreenTEC for easiest to print, or ASA for excellent uv resistance (outdoors indefinitely).

Key differences at a glance

Property
Extrudr GreenTEC
ASA
Nozzle temp
208°C
220-275°C
Bed temp
60°C
90-110°C
Enclosure needed
No
Recommended
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

Extrudr GreenTEC

-

Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal

ASA

A

Acrylonitrile Styrene Acrylate

Excellent UV resistance (outdoors indefinitely), tough, matte surface

Detailed Comparison

Property
Extrudr GreenTEC
ASA
Tier Rating
Tier null
Tier A
Family
PLA
ASA
Nozzle Temp
208°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Extrudr GreenTEC Strengths

  • Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
  • Stiff non-composite thermoplastic, good tensile strength

ASA Strengths

  • Excellent UV resistance (outdoors indefinitely), tough, matte surface
  • Less warping than ABS; low viscosity enables very high speed printing
  • High heat tolerance (~boiling water range)

Considerations

Extrudr GreenTEC Caveats

  • Creeps under sustained load
  • Poor heat resistance, UV degradation, can shatter on drops
  • Not great for sanding/gluing/painting/touch-ups

ASA Caveats

  • Still off-gasses; enclosure/ventilation recommended
  • Can still warp; needs tuning

Frequently Asked Questions

What is the difference between Extrudr GreenTEC and ASA?
Extrudr GreenTEC prints at 208°C nozzle / 60°C bed (No enclosure, low moisture sensitivity). ASA prints at 220-275°C nozzle / 90-110°C bed (Recommended enclosure, moderate moisture sensitivity).
Is Extrudr GreenTEC or ASA stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Extrudr GreenTEC is suited to easiest to print, while ASA is suited to excellent uv resistance (outdoors indefinitely).
Which prints at a higher temperature, Extrudr GreenTEC or ASA?
ASA prints at a higher temperature (220-275°C nozzle vs 208°C for Extrudr GreenTEC).
Is Extrudr GreenTEC or ASA better for beginners?
Extrudr GreenTEC is better for beginners: enclosure is no and moisture sensitivity is low, vs recommended enclosure and moderate moisture for ASA.
Should I use Extrudr GreenTEC or ASA for outdoor use?
For outdoor use, ASA is usually the better fit (Excellent UV resistance (outdoors indefinitely)). Choose Extrudr GreenTEC instead when easiest to print.

Other Popular Comparisons

PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG