Extrudr GreenTEC vs PLA
Compare Extrudr GreenTEC and PLA filaments side-by-side. See which one is best for your 3D printing project.
Extrudr GreenTEC
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
Extrudr GreenTEC
PLA
Tier Rating
Tier null
Tier A
Family
PLA
PLA
Nozzle Temp
208°C
185-235°C
Bed Temp
60°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Strengths Comparison
Extrudr GreenTEC Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Extrudr GreenTEC Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is Extrudr GreenTEC or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to Extrudr GreenTEC (Tier null). However, the best choice depends on your specific needs: Extrudr GreenTEC is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between Extrudr GreenTEC and PLA?
Extrudr GreenTEC prints at 208°C nozzle / 60°C bed. PLA prints at 185-235°C nozzle / 50-60°C bed.
Do Extrudr GreenTEC and PLA need an enclosure?
Extrudr GreenTEC: not needed. PLA: not needed.
Which is more beginner-friendly: Extrudr GreenTEC or PLA?
Both Extrudr GreenTEC and PLA are beginner-friendly options.