Fiberlogy Easy PET-G vs PLA
Compare Fiberlogy Easy PET-G and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Fiberlogy Easy PET-G
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
Fiberlogy Easy PET-G
PLA
Tier Rating
Tier null
Tier A
Family
PETG
PLA
Nozzle Temp
235°C
190-220°C
Bed Temp
80°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Fiberlogy Easy PET-G Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Fiberlogy Easy PET-G Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is Fiberlogy Easy PET-G or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to Fiberlogy Easy PET-G (Tier null). However, the best choice depends on your specific needs: Fiberlogy Easy PET-G is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between Fiberlogy Easy PET-G and PLA?
Fiberlogy Easy PET-G prints at 235°C nozzle / 80°C bed. PLA prints at 190-220°C nozzle / 50-60°C bed.
Do Fiberlogy Easy PET-G and PLA need an enclosure?
Fiberlogy Easy PET-G: not needed. PLA: not needed.
Which is more beginner-friendly: Fiberlogy Easy PET-G or PLA?
Both Fiberlogy Easy PET-G and PLA are beginner-friendly options.