Fiberlogy Easy PLA vs TPU
Compare Fiberlogy Easy PLA and TPU filaments side-by-side so you can pick the right one for your 3D printing project.
Fiberlogy Easy PLA vs TPU: Fiberlogy Easy PLA is known for easiest to print, while TPU is known for excellent layer adhesion. Both have no enclosure requirements; Fiberlogy Easy PLA is less moisture-sensitive; TPU prints at higher nozzle temperatures (200-240°C vs 210°C). Choose Fiberlogy Easy PLA for easiest to print, or TPU for excellent layer adhesion.
Key differences at a glance
Fiberlogy Easy PLA
-Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
TPU
SThermoplastic Polyurethane
Excellent layer adhesion; extremely impact resistant; highly durable
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Fiberlogy Easy PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
TPU Strengths
- Excellent layer adhesion; extremely impact resistant; highly durable
- Great for combat robots, tactical/rough-use parts
- Rubber-like parts (gaskets, grips, bumpers, wheels)
Considerations
Fiberlogy Easy PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
TPU Caveats
- Slow printing; retraction can cause jams (especially in Bowden setups)
- Stringing is common
- Very moisture sensitive; wet TPU prints poorly