Fiberlogy Nylon PA12+CF15 vs PLA
Compare Fiberlogy Nylon PA12+CF15 and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Fiberlogy Nylon PA12+CF15 vs PLA: Fiberlogy Nylon PA12+CF15 is known for massively stiffer/tougher/more heat & abrasion resistant than nylon, while PLA is known for easiest to print. Both have no enclosure requirements; Fiberlogy Nylon PA12+CF15 is less moisture-sensitive; Fiberlogy Nylon PA12+CF15 prints at higher nozzle temperatures (265°C vs 190-220°C). Choose Fiberlogy Nylon PA12+CF15 for massively stiffer/tougher/more heat & abrasion resistant than nylon, or PLA for easiest to print.
Key differences at a glance
Fiberlogy Nylon PA12+CF15
-Massively stiffer/tougher/more heat & abrasion resistant than nylon
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Fiberlogy Nylon PA12+CF15 Strengths
- Massively stiffer/tougher/more heat & abrasion resistant than nylon
- Warping reduced enough to be fairly easy to print (with correct setup)
- Viable alternative to machined aluminum for some parts
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Fiberlogy Nylon PA12+CF15 Caveats
- Higher print temps; hardware wear if not equipped
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups