Filamentworld ABS vs ASA

Compare Filamentworld ABS and ASA filaments side-by-side so you can pick the right one for your 3D printing project.

Filamentworld ABS vs ASA: Filamentworld ABS is known for fast printing, while ASA is known for excellent uv resistance (outdoors indefinitely). Filamentworld ABS is easier to print; ASA prints at higher nozzle temperatures (220-275°C vs 230°C). Choose Filamentworld ABS for fast printing, or ASA for excellent uv resistance (outdoors indefinitely).

Key differences at a glance

Property
Filamentworld ABS
ASA
Nozzle temp
230°C
220-275°C
Bed temp
95°C
90-110°C
Enclosure needed
No
Recommended
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

Filamentworld ABS

-

Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance

ASA

A

Acrylonitrile Styrene Acrylate

Excellent UV resistance (outdoors indefinitely), tough, matte surface

Detailed Comparison

Property
Filamentworld ABS
ASA
Tier Rating
Tier null
Tier A
Family
ABS
ASA
Nozzle Temp
230°C
220-275°C
Bed Temp
95°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Filamentworld ABS Strengths

  • Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
  • Good impact toughness for the price

ASA Strengths

  • Excellent UV resistance (outdoors indefinitely), tough, matte surface
  • Less warping than ABS; low viscosity enables very high speed printing
  • High heat tolerance (~boiling water range)

Considerations

Filamentworld ABS Caveats

  • Warps heavily
  • Strong fumes/off-gassing; enclosure plus ventilation recommended
  • Poor UV resistance; yellows and gets brittle outdoors (ASA is the better outdoor/UV choice)

ASA Caveats

  • Still off-gasses; enclosure/ventilation recommended
  • Can still warp; needs tuning

Frequently Asked Questions

What is the difference between Filamentworld ABS and ASA?
Filamentworld ABS prints at 230°C nozzle / 95°C bed (No enclosure, low moisture sensitivity). ASA prints at 220-275°C nozzle / 90-110°C bed (Recommended enclosure, moderate moisture sensitivity).
Is Filamentworld ABS or ASA stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Filamentworld ABS is suited to fast printing, while ASA is suited to excellent uv resistance (outdoors indefinitely).
Which prints at a higher temperature, Filamentworld ABS or ASA?
ASA prints at a higher temperature (220-275°C nozzle vs 230°C for Filamentworld ABS).
Is Filamentworld ABS or ASA better for beginners?
Filamentworld ABS is better for beginners: enclosure is no and moisture sensitivity is low, vs recommended enclosure and moderate moisture for ASA.
Should I use Filamentworld ABS or ASA for outdoor use?
For outdoor use, ASA is usually the better fit (Excellent UV resistance (outdoors indefinitely)). Choose Filamentworld ABS instead when fast printing.

Other Popular Comparisons

PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG