Filamentworld PETG vs ASA
Compare Filamentworld PETG and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
Filamentworld PETG
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Filamentworld PETG
ASA
Tier Rating
Tier null
Tier A
Family
PETG
ASA
Nozzle Temp
235°C
220-275°C
Bed Temp
70°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Filamentworld PETG Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Filamentworld PETG Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Filamentworld PETG or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Filamentworld PETG (Tier null). However, the best choice depends on your specific needs: Filamentworld PETG is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Filamentworld PETG and ASA?
Filamentworld PETG prints at 235°C nozzle / 70°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Filamentworld PETG and ASA need an enclosure?
Filamentworld PETG: not needed. ASA: recommended.
Which is more beginner-friendly: Filamentworld PETG or ASA?
Filamentworld PETG is more beginner-friendly as it doesn't require an enclosure.