Filamentworld PLA vs PLA

Compare Filamentworld PLA and PLA filaments side-by-side so you can pick the right one for your 3D printing project.

Filamentworld PLA vs PLA: Filamentworld PLA is known for easiest to print, while PLA is known for easiest to print. Both have no enclosure requirements; Filamentworld PLA is less moisture-sensitive. Choose Filamentworld PLA for easiest to print, or PLA for easiest to print.

Key differences at a glance

Property
Filamentworld PLA
PLA
Nozzle temp
205°C
190-220°C
Bed temp
55°C
50-60°C
Enclosure needed
No
No
Ease of printing
Easy
Easy
Moisture sensitivity
low
moderate

Filamentworld PLA

-

Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal

PLA

A

Polylactic Acid

Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal

Detailed Comparison

Property
Filamentworld PLA
PLA
Tier Rating
Tier null
Tier A
Family
PLA
PLA
Nozzle Temp
205°C
190-220°C
Bed Temp
55°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Filamentworld PLA Strengths

  • Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
  • Stiff non-composite thermoplastic, good tensile strength

PLA Strengths

  • Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
  • Stiff non-composite thermoplastic, good tensile strength

Considerations

Filamentworld PLA Caveats

  • Creeps under sustained load
  • Poor heat resistance, UV degradation, can shatter on drops
  • Not great for sanding/gluing/painting/touch-ups

PLA Caveats

  • Creeps under sustained load
  • Poor heat resistance, UV degradation, can shatter on drops
  • Not great for sanding/gluing/painting/touch-ups

Frequently Asked Questions

What is the difference between Filamentworld PLA and PLA?
Filamentworld PLA prints at 205°C nozzle / 55°C bed (No enclosure, low moisture sensitivity). PLA prints at 190-220°C nozzle / 50-60°C bed (No enclosure, moderate moisture sensitivity).
Is Filamentworld PLA or PLA stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Filamentworld PLA is suited to easiest to print, while PLA is suited to easiest to print.
Which prints at a higher temperature, Filamentworld PLA or PLA?
Both print at similar nozzle temperatures (205°C vs 190-220°C).
Is Filamentworld PLA or PLA better for beginners?
Filamentworld PLA is better for beginners: enclosure is no and moisture sensitivity is low, vs no enclosure and moderate moisture for PLA.
Should I use Filamentworld PLA or PLA for easiest to print?
For easiest to print, Filamentworld PLA is usually the better fit (Easiest to print). Choose PLA instead when easiest to print.

Other Popular Comparisons

PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG