Filatech ABS vs PLA
Compare Filatech ABS and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Filatech ABS
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
Filatech ABS
PLA
Tier Rating
Tier null
Tier A
Family
ABS
PLA
Nozzle Temp
255°C
190-220°C
Bed Temp
110°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Filatech ABS Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Filatech ABS Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is Filatech ABS or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to Filatech ABS (Tier null). However, the best choice depends on your specific needs: Filatech ABS is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between Filatech ABS and PLA?
Filatech ABS prints at 255°C nozzle / 110°C bed. PLA prints at 190-220°C nozzle / 50-60°C bed.
Do Filatech ABS and PLA need an enclosure?
Filatech ABS: not needed. PLA: not needed.
Which is more beginner-friendly: Filatech ABS or PLA?
Both Filatech ABS and PLA are beginner-friendly options.