Filatech Filacarbon vs ASA

Compare Filatech Filacarbon and ASA filaments side-by-side so you can pick the right one for your 3D printing project.

Filatech Filacarbon vs ASA: Filatech Filacarbon is known for general use, while ASA is known for excellent uv resistance (outdoors indefinitely). Filatech Filacarbon is easier to print; Filatech Filacarbon prints at higher nozzle temperatures (255°C vs 220-275°C). Choose Filatech Filacarbon for general use, or ASA for excellent uv resistance (outdoors indefinitely).

Key differences at a glance

Property
Filatech Filacarbon
ASA
Nozzle temp
255°C
220-275°C
Bed temp
100°C
90-110°C
Enclosure needed
No
Recommended
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

Filatech Filacarbon

-

Versatile 3D printing filament

ASA

A

Acrylonitrile Styrene Acrylate

Excellent UV resistance (outdoors indefinitely), tough, matte surface

Detailed Comparison

Property
Filatech Filacarbon
ASA
Tier Rating
Tier null
Tier A
Family
Specialty
ASA
Nozzle Temp
255°C
220-275°C
Bed Temp
100°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Filatech Filacarbon Strengths

    ASA Strengths

    • Excellent UV resistance (outdoors indefinitely), tough, matte surface
    • Less warping than ABS; low viscosity enables very high speed printing
    • High heat tolerance (~boiling water range)

    Considerations

    Filatech Filacarbon Caveats

      ASA Caveats

      • Still off-gasses; enclosure/ventilation recommended
      • Can still warp; needs tuning

      Frequently Asked Questions

      What is the difference between Filatech Filacarbon and ASA?
      Filatech Filacarbon prints at 255°C nozzle / 100°C bed (No enclosure, low moisture sensitivity). ASA prints at 220-275°C nozzle / 90-110°C bed (Recommended enclosure, moderate moisture sensitivity).
      Is Filatech Filacarbon or ASA stronger?
      Our dataset does not include comparable tensile strength values for both. Qualitatively, Filatech Filacarbon is suited to , while ASA is suited to excellent uv resistance (outdoors indefinitely).
      Which prints at a higher temperature, Filatech Filacarbon or ASA?
      Filatech Filacarbon prints at a higher temperature (255°C nozzle vs 220-275°C for ASA).
      Is Filatech Filacarbon or ASA better for beginners?
      Filatech Filacarbon is better for beginners: enclosure is no and moisture sensitivity is low, vs recommended enclosure and moderate moisture for ASA.
      Should I use Filatech Filacarbon or ASA for outdoor use?
      For outdoor use, ASA is usually the better fit (Excellent UV resistance (outdoors indefinitely)). Choose Filatech Filacarbon instead when .

      Other Popular Comparisons

      PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG