Filatech FilaFlex 55 vs ASA
Compare Filatech FilaFlex 55 and ASA filaments side-by-side. See which one is best for your 3D printing project.
Filatech FilaFlex 55
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Filatech FilaFlex 55
ASA
Tier Rating
Tier null
Tier A
Family
Flexible
ASA
Nozzle Temp
230°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
Filatech FilaFlex 55 Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Filatech FilaFlex 55 Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Filatech FilaFlex 55 or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Filatech FilaFlex 55 (Tier null). However, the best choice depends on your specific needs: Filatech FilaFlex 55 is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Filatech FilaFlex 55 and ASA?
Filatech FilaFlex 55 prints at 230°C nozzle / 60°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Filatech FilaFlex 55 and ASA need an enclosure?
Filatech FilaFlex 55: not needed. ASA: recommended.
Which is more beginner-friendly: Filatech FilaFlex 55 or ASA?
Filatech FilaFlex 55 is more beginner-friendly as it doesn't require an enclosure.