Filatech FilaFlex 55 vs PETG
Compare Filatech FilaFlex 55 and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
Filatech FilaFlex 55 vs PETG: Filatech FilaFlex 55 is known for excellent layer adhesion, while PETG is known for tougher than pla. Filatech FilaFlex 55 is easier to print; PETG prints at higher nozzle temperatures (230-250°C vs 230°C). Choose Filatech FilaFlex 55 for excellent layer adhesion, or PETG for tougher than pla.
Key differences at a glance
Filatech FilaFlex 55
-Excellent layer adhesion; extremely impact resistant; highly durable
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Filatech FilaFlex 55 Strengths
- Excellent layer adhesion; extremely impact resistant; highly durable
- Great for combat robots, tactical/rough-use parts
- Rubber-like parts (gaskets, grips, bumpers, wheels)
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
Filatech FilaFlex 55 Caveats
- Slow printing; retraction can cause jams (especially in Bowden setups)
- Stringing is common
- Very moisture sensitive; wet TPU prints poorly
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly