Filatech PLA+ vs PETG
Compare Filatech PLA+ and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
Filatech PLA+
-Versatile 3D printing filament
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Property
Filatech PLA+
PETG
Tier Rating
Tier null
Tier A
Family
PLA
PETG
Nozzle Temp
210°C
230-250°C
Bed Temp
60°C
70-90°C
Enclosure
not needed
optional
Cooling
Moderate cooling; too much cooling can hurt layer adhesion
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Filatech PLA+ Strengths
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
Filatech PLA+ Caveats
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly
Frequently Asked Questions
Is Filatech PLA+ or PETG better for 3D printing?
PETG is generally rated higher (Tier A) compared to Filatech PLA+ (Tier null). However, the best choice depends on your specific needs: Filatech PLA+ is best for various applications, while PETG is best for Tougher than PLA, higher temp tolerance, more durable in real-world use.
What are the temperature differences between Filatech PLA+ and PETG?
Filatech PLA+ prints at 210°C nozzle / 60°C bed. PETG prints at 230-250°C nozzle / 70-90°C bed.
Do Filatech PLA+ and PETG need an enclosure?
Filatech PLA+: not needed. PETG: optional.
Which is more beginner-friendly: Filatech PLA+ or PETG?
Both Filatech PLA+ and PETG are beginner-friendly options.