Fillamentum ABS vs PLA
Compare Fillamentum ABS and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Fillamentum ABS vs PLA: Fillamentum ABS is known for fast printing, while PLA is known for easiest to print. Both have no enclosure requirements; Fillamentum ABS is less moisture-sensitive; Fillamentum ABS prints at higher nozzle temperatures (240°C vs 190-220°C). Choose Fillamentum ABS for fast printing, or PLA for easiest to print.
Key differences at a glance
Fillamentum ABS
-Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Fillamentum ABS Strengths
- Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
- Good impact toughness for the price
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Fillamentum ABS Caveats
- Warps heavily
- Strong fumes/off-gassing; enclosure plus ventilation recommended
- Poor UV resistance; yellows and gets brittle outdoors (ASA is the better outdoor/UV choice)
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups