Fillamentum ASA vs TPU

Compare Fillamentum ASA and TPU filaments side-by-side so you can pick the right one for your 3D printing project.

Fillamentum ASA vs TPU: Fillamentum ASA is known for excellent uv resistance (outdoors indefinitely), while TPU is known for excellent layer adhesion. Both have no enclosure requirements; Fillamentum ASA is less moisture-sensitive; Fillamentum ASA prints at higher nozzle temperatures (260°C vs 200-240°C). Choose Fillamentum ASA for excellent uv resistance (outdoors indefinitely), or TPU for excellent layer adhesion.

Key differences at a glance

Property
Fillamentum ASA
TPU
Nozzle temp
260°C
200-240°C
Bed temp
110°C
30-60°C
Enclosure needed
No
No
Ease of printing
Easy
Easy
Moisture sensitivity
low
high

Fillamentum ASA

-

Excellent UV resistance (outdoors indefinitely), tough, matte surface

TPU

S

Thermoplastic Polyurethane

Excellent layer adhesion; extremely impact resistant; highly durable

Detailed Comparison

Property
Fillamentum ASA
TPU
Tier Rating
Tier null
Tier S
Family
ASA
Flexible
Nozzle Temp
260°C
200-240°C
Bed Temp
110°C
30-60°C
Enclosure
not needed
not needed
Cooling
Moderate cooling
Moisture Sensitivity
low
high

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Fillamentum ASA Strengths

  • Excellent UV resistance (outdoors indefinitely), tough, matte surface
  • Less warping than ABS; low viscosity enables very high speed printing
  • High heat tolerance (~boiling water range)

TPU Strengths

  • Excellent layer adhesion; extremely impact resistant; highly durable
  • Great for combat robots, tactical/rough-use parts
  • Rubber-like parts (gaskets, grips, bumpers, wheels)

Considerations

Fillamentum ASA Caveats

  • Still off-gasses; enclosure/ventilation recommended
  • Can still warp; needs tuning

TPU Caveats

  • Slow printing; retraction can cause jams (especially in Bowden setups)
  • Stringing is common
  • Very moisture sensitive; wet TPU prints poorly

Frequently Asked Questions

What is the difference between Fillamentum ASA and TPU?
Fillamentum ASA prints at 260°C nozzle / 110°C bed (No enclosure, low moisture sensitivity). TPU prints at 200-240°C nozzle / 30-60°C bed (No enclosure, high moisture sensitivity).
Is Fillamentum ASA or TPU stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Fillamentum ASA is suited to excellent uv resistance (outdoors indefinitely), while TPU is suited to excellent layer adhesion.
Which prints at a higher temperature, Fillamentum ASA or TPU?
Fillamentum ASA prints at a higher temperature (260°C nozzle vs 200-240°C for TPU).
Is Fillamentum ASA or TPU better for beginners?
Fillamentum ASA is better for beginners: enclosure is no and moisture sensitivity is low, vs no enclosure and high moisture for TPU.
Should I use Fillamentum ASA or TPU for flexible parts?
For flexible parts, TPU is usually the better fit (Excellent layer adhesion). Choose Fillamentum ASA instead when excellent uv resistance (outdoors indefinitely).

Other Popular Comparisons

PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG