Kimya ABS Carbon vs PETG
Compare Kimya ABS Carbon and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
Kimya ABS Carbon vs PETG: Kimya ABS Carbon is known for fast printing, while PETG is known for tougher than pla. Kimya ABS Carbon is easier to print; Kimya ABS Carbon prints at higher nozzle temperatures (260°C vs 230-250°C). Choose Kimya ABS Carbon for fast printing, or PETG for tougher than pla.
Key differences at a glance
Kimya ABS Carbon
-Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Kimya ABS Carbon Strengths
- Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
- Good impact toughness for the price
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
Kimya ABS Carbon Caveats
- Warps heavily
- Strong fumes/off-gassing; enclosure plus ventilation recommended
- Poor UV resistance; yellows and gets brittle outdoors (ASA is the better outdoor/UV choice)
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly