Kimya ABS Carbon vs PLA
Compare Kimya ABS Carbon and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Kimya ABS Carbon vs PLA: Kimya ABS Carbon is known for fast printing, while PLA is known for easiest to print. Both have no enclosure requirements; Kimya ABS Carbon is less moisture-sensitive; Kimya ABS Carbon prints at higher nozzle temperatures (260°C vs 190-220°C). Choose Kimya ABS Carbon for fast printing, or PLA for easiest to print.
Key differences at a glance
Kimya ABS Carbon
-Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Kimya ABS Carbon Strengths
- Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
- Good impact toughness for the price
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Kimya ABS Carbon Caveats
- Warps heavily
- Strong fumes/off-gassing; enclosure plus ventilation recommended
- Poor UV resistance; yellows and gets brittle outdoors (ASA is the better outdoor/UV choice)
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups