Kimya ABS Kevlar vs TPU
Compare Kimya ABS Kevlar and TPU filaments side-by-side so you can pick the right one for your 3D printing project.
Kimya ABS Kevlar vs TPU: Kimya ABS Kevlar is known for fast printing, while TPU is known for excellent layer adhesion. Both have no enclosure requirements; Kimya ABS Kevlar is less moisture-sensitive; Kimya ABS Kevlar prints at higher nozzle temperatures (260°C vs 200-240°C). Choose Kimya ABS Kevlar for fast printing, or TPU for excellent layer adhesion.
Key differences at a glance
Kimya ABS Kevlar
-Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
TPU
SThermoplastic Polyurethane
Excellent layer adhesion; extremely impact resistant; highly durable
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Kimya ABS Kevlar Strengths
- Fast printing, acetone soluble (weld/vapor smooth), cheap, tough, decent heat resistance
- Good impact toughness for the price
TPU Strengths
- Excellent layer adhesion; extremely impact resistant; highly durable
- Great for combat robots, tactical/rough-use parts
- Rubber-like parts (gaskets, grips, bumpers, wheels)
Considerations
Kimya ABS Kevlar Caveats
- Warps heavily
- Strong fumes/off-gassing; enclosure plus ventilation recommended
- Poor UV resistance; yellows and gets brittle outdoors (ASA is the better outdoor/UV choice)
TPU Caveats
- Slow printing; retraction can cause jams (especially in Bowden setups)
- Stringing is common
- Very moisture sensitive; wet TPU prints poorly