PrimaSelect PVA+ vs ASA
Compare PrimaSelect PVA+ and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
PrimaSelect PVA+
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
PrimaSelect
PVA+
ASA
Tier Rating
Tier null
Tier A
Family
PVA
ASA
Nozzle Temp
195°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
PrimaSelect PVA+ Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
PrimaSelect PVA+ Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is PrimaSelect PVA+ or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to PrimaSelect
PVA+ (Tier null). However, the best choice depends on your specific needs: PrimaSelect
PVA+ is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between PrimaSelect PVA+ and ASA?
PrimaSelect
PVA+ prints at 195°C nozzle / 60°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do PrimaSelect PVA+ and ASA need an enclosure?
PrimaSelect
PVA+: not needed. ASA: recommended.
Which is more beginner-friendly: PrimaSelect PVA+ or ASA?
PrimaSelect
PVA+ is more beginner-friendly as it doesn't require an enclosure.