Prusament PA11 Carbon Fiber vs PETG
Compare Prusament PA11 Carbon Fiber and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
Prusament PA11 Carbon Fiber vs PETG: Prusament PA11 Carbon Fiber is known for massively stiffer/tougher/more heat & abrasion resistant than nylon, while PETG is known for tougher than pla. Prusament PA11 Carbon Fiber is easier to print; Prusament PA11 Carbon Fiber prints at higher nozzle temperatures (285°C vs 230-250°C). Choose Prusament PA11 Carbon Fiber for massively stiffer/tougher/more heat & abrasion resistant than nylon, or PETG for tougher than pla.
Key differences at a glance
Prusament PA11 Carbon Fiber
-Massively stiffer/tougher/more heat & abrasion resistant than nylon
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Prusament PA11 Carbon Fiber Strengths
- Massively stiffer/tougher/more heat & abrasion resistant than nylon
- Warping reduced enough to be fairly easy to print (with correct setup)
- Viable alternative to machined aluminum for some parts
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
Prusament PA11 Carbon Fiber Caveats
- Higher print temps; hardware wear if not equipped
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly