Prusament PC Blend Carbon Fiber vs ASA
Compare Prusament PC Blend Carbon Fiber and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
Prusament PC Blend Carbon Fiber vs ASA: Prusament PC Blend Carbon Fiber is known for extremely stiff, while ASA is known for excellent uv resistance (outdoors indefinitely). Prusament PC Blend Carbon Fiber is easier to print; Prusament PC Blend Carbon Fiber prints at higher nozzle temperatures (285°C vs 220-275°C). Choose Prusament PC Blend Carbon Fiber for extremely stiff, or ASA for excellent uv resistance (outdoors indefinitely).
Key differences at a glance
Prusament PC Blend Carbon Fiber
-Extremely stiff; useful where flex must be minimal
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Prusament PC Blend Carbon Fiber Strengths
- Extremely stiff; useful where flex must be minimal
- Surprisingly affordable in some brands
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Prusament PC Blend Carbon Fiber Caveats
- Feeding can be difficult unless spool is close/direct-fed
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning