Prusament PETG Magnetite 40% vs PETG
Compare Prusament PETG Magnetite 40% and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
Prusament PETG Magnetite 40%
-Versatile 3D printing filament
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Property
Prusament PETG Magnetite 40%
PETG
Tier Rating
Tier null
Tier A
Family
Specialty
PETG
Nozzle Temp
270°C
230-250°C
Bed Temp
100°C
70-90°C
Enclosure
not needed
optional
Cooling
Moderate cooling; too much cooling can hurt layer adhesion
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Prusament PETG Magnetite 40% Strengths
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
Prusament PETG Magnetite 40% Caveats
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly
Frequently Asked Questions
Is Prusament PETG Magnetite 40% or PETG better for 3D printing?
PETG is generally rated higher (Tier A) compared to Prusament PETG Magnetite 40% (Tier null). However, the best choice depends on your specific needs: Prusament PETG Magnetite 40% is best for various applications, while PETG is best for Tougher than PLA, higher temp tolerance, more durable in real-world use.
What are the temperature differences between Prusament PETG Magnetite 40% and PETG?
Prusament PETG Magnetite 40% prints at 270°C nozzle / 100°C bed. PETG prints at 230-250°C nozzle / 70-90°C bed.
Do Prusament PETG Magnetite 40% and PETG need an enclosure?
Prusament PETG Magnetite 40%: not needed. PETG: optional.
Which is more beginner-friendly: Prusament PETG Magnetite 40% or PETG?
Both Prusament PETG Magnetite 40% and PETG are beginner-friendly options.