Prusament PETG Tungsten 75% vs ASA
Compare Prusament PETG Tungsten 75% and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
Prusament PETG Tungsten 75%
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Prusament PETG Tungsten 75%
ASA
Tier Rating
Tier null
Tier A
Family
Specialty
ASA
Nozzle Temp
260°C
220-275°C
Bed Temp
85°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Prusament PETG Tungsten 75% Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Prusament PETG Tungsten 75% Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Prusament PETG Tungsten 75% or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Prusament PETG Tungsten 75% (Tier null). However, the best choice depends on your specific needs: Prusament PETG Tungsten 75% is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Prusament PETG Tungsten 75% and ASA?
Prusament PETG Tungsten 75% prints at 260°C nozzle / 85°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Prusament PETG Tungsten 75% and ASA need an enclosure?
Prusament PETG Tungsten 75%: not needed. ASA: recommended.
Which is more beginner-friendly: Prusament PETG Tungsten 75% or ASA?
Prusament PETG Tungsten 75% is more beginner-friendly as it doesn't require an enclosure.