Prusament PETG V0 vs ASA
Compare Prusament PETG V0 and ASA filaments side-by-side. See which one is best for your 3D printing project.
Prusament PETG V0
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Prusament PETG V0
ASA
Tier Rating
Tier null
Tier A
Family
PETG
ASA
Nozzle Temp
230°C
220-275°C
Bed Temp
90°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
Prusament PETG V0 Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Prusament PETG V0 Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Prusament PETG V0 or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Prusament PETG V0 (Tier null). However, the best choice depends on your specific needs: Prusament PETG V0 is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Prusament PETG V0 and ASA?
Prusament PETG V0 prints at 230°C nozzle / 90°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Prusament PETG V0 and ASA need an enclosure?
Prusament PETG V0: not needed. ASA: recommended.
Which is more beginner-friendly: Prusament PETG V0 or ASA?
Prusament PETG V0 is more beginner-friendly as it doesn't require an enclosure.