Prusament PETG V0 vs PLA
Compare Prusament PETG V0 and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Prusament PETG V0 vs PLA: Prusament PETG V0 is known for tougher than pla, while PLA is known for easiest to print. Both have no enclosure requirements; Prusament PETG V0 is less moisture-sensitive; Prusament PETG V0 prints at higher nozzle temperatures (230°C vs 190-220°C). Choose Prusament PETG V0 for tougher than pla, or PLA for easiest to print.
Key differences at a glance
Prusament PETG V0
-Tougher than PLA, higher temp tolerance, more durable in real-world use
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Prusament PETG V0 Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Prusament PETG V0 Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups