Smartfil Wood vs ASA

Compare Smartfil Wood and ASA filaments side-by-side so you can pick the right one for your 3D printing project.

Smartfil Wood vs ASA: Smartfil Wood is known for general use, while ASA is known for excellent uv resistance (outdoors indefinitely). Smartfil Wood is easier to print; ASA prints at higher nozzle temperatures (220-275°C vs 220°C). Choose Smartfil Wood for general use, or ASA for excellent uv resistance (outdoors indefinitely).

Key differences at a glance

Property
Smartfil Wood
ASA
Nozzle temp
220°C
220-275°C
Bed temp
60°C
90-110°C
Enclosure needed
No
Recommended
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

Smartfil Wood

-

Versatile 3D printing filament

ASA

A

Acrylonitrile Styrene Acrylate

Excellent UV resistance (outdoors indefinitely), tough, matte surface

Detailed Comparison

Property
Smartfil Wood
ASA
Tier Rating
Tier null
Tier A
Family
Specialty
ASA
Nozzle Temp
220°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Smartfil Wood Strengths

    ASA Strengths

    • Excellent UV resistance (outdoors indefinitely), tough, matte surface
    • Less warping than ABS; low viscosity enables very high speed printing
    • High heat tolerance (~boiling water range)

    Considerations

    Smartfil Wood Caveats

      ASA Caveats

      • Still off-gasses; enclosure/ventilation recommended
      • Can still warp; needs tuning

      Frequently Asked Questions

      What is the difference between Smartfil Wood and ASA?
      Smartfil Wood prints at 220°C nozzle / 60°C bed (No enclosure, low moisture sensitivity). ASA prints at 220-275°C nozzle / 90-110°C bed (Recommended enclosure, moderate moisture sensitivity).
      Is Smartfil Wood or ASA stronger?
      Our dataset does not include comparable tensile strength values for both. Qualitatively, Smartfil Wood is suited to , while ASA is suited to excellent uv resistance (outdoors indefinitely).
      Which prints at a higher temperature, Smartfil Wood or ASA?
      ASA prints at a higher temperature (220-275°C nozzle vs 220°C for Smartfil Wood).
      Is Smartfil Wood or ASA better for beginners?
      Smartfil Wood is better for beginners: enclosure is no and moisture sensitivity is low, vs recommended enclosure and moderate moisture for ASA.
      Should I use Smartfil Wood or ASA for outdoor use?
      For outdoor use, ASA is usually the better fit (Excellent UV resistance (outdoors indefinitely)). Choose Smartfil Wood instead when .

      Other Popular Comparisons

      PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG