Ultrafuse ABS fusion+ vs PLA
Compare Ultrafuse ABS fusion+ and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Ultrafuse ABS fusion+
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
Ultrafuse ABS fusion+
PLA
Tier Rating
Tier null
Tier A
Family
ABS
PLA
Nozzle Temp
250°C
190-220°C
Bed Temp
100°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Ultrafuse ABS fusion+ Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Ultrafuse ABS fusion+ Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is Ultrafuse ABS fusion+ or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to Ultrafuse ABS fusion+ (Tier null). However, the best choice depends on your specific needs: Ultrafuse ABS fusion+ is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between Ultrafuse ABS fusion+ and PLA?
Ultrafuse ABS fusion+ prints at 250°C nozzle / 100°C bed. PLA prints at 190-220°C nozzle / 50-60°C bed.
Do Ultrafuse ABS fusion+ and PLA need an enclosure?
Ultrafuse ABS fusion+: not needed. PLA: not needed.
Which is more beginner-friendly: Ultrafuse ABS fusion+ or PLA?
Both Ultrafuse ABS fusion+ and PLA are beginner-friendly options.