Ultrafuse PA vs PETG
Compare Ultrafuse PA and PETG filaments side-by-side so you can pick the right one for your 3D printing project.
Ultrafuse PA vs PETG: Ultrafuse PA is known for general use, while PETG is known for tougher than pla. Ultrafuse PA is easier to print. Choose Ultrafuse PA for general use, or PETG for tougher than pla.
Key differences at a glance
Property
Ultrafuse PA
PETG
Nozzle temp
240°C
230-250°C
Bed temp
70°C
70-90°C
Enclosure needed
No
Optional
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate
Ultrafuse PA
-Versatile 3D printing filament
PETG
APolyethylene Terephthalate Glycol-modified
Tougher than PLA, higher temp tolerance, more durable in real-world use
Detailed Comparison
Property
Ultrafuse PA
PETG
Tier Rating
Tier null
Tier A
Family
Nylon
PETG
Nozzle Temp
240°C
230-250°C
Bed Temp
70°C
70-90°C
Enclosure
not needed
optional
Cooling
Moderate cooling; too much cooling can hurt layer adhesion
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Ultrafuse PA Strengths
PETG Strengths
- Tougher than PLA, higher temp tolerance, more durable in real-world use
- Good clarity and low friction among easy-to-print materials
Considerations
Ultrafuse PA Caveats
PETG Caveats
- Overhangs/bridges sag; supports can be hard to remove
- Absorbs water fairly quickly
Frequently Asked Questions
What is the difference between Ultrafuse PA and PETG?
Ultrafuse PA prints at 240°C nozzle / 70°C bed (No enclosure, low moisture sensitivity). PETG prints at 230-250°C nozzle / 70-90°C bed (Optional enclosure, moderate moisture sensitivity).
Is Ultrafuse PA or PETG stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Ultrafuse PA is suited to , while PETG is suited to tougher than pla.
Which prints at a higher temperature, Ultrafuse PA or PETG?
Both print at similar nozzle temperatures (240°C vs 230-250°C).
Is Ultrafuse PA or PETG better for beginners?
Ultrafuse PA is better for beginners: enclosure is no and moisture sensitivity is low, vs optional enclosure and moderate moisture for PETG.
Should I use Ultrafuse PA or PETG for tougher than pla?
For tougher than pla, Ultrafuse PA is usually the better fit (). Choose PETG instead when tougher than pla.