Ultrafuse PA6 GF30 vs ASA

Compare Ultrafuse PA6 GF30 and ASA filaments side-by-side so you can pick the right one for your 3D printing project.

Ultrafuse PA6 GF30 vs ASA: Ultrafuse PA6 GF30 is known for massively stiffer/tougher/more heat & abrasion resistant than nylon, while ASA is known for excellent uv resistance (outdoors indefinitely). Ultrafuse PA6 GF30 is easier to print; Ultrafuse PA6 GF30 prints at higher nozzle temperatures (270°C vs 220-275°C). Choose Ultrafuse PA6 GF30 for massively stiffer/tougher/more heat & abrasion resistant than nylon, or ASA for excellent uv resistance (outdoors indefinitely).

Key differences at a glance

Property
Ultrafuse PA6 GF30
ASA
Nozzle temp
270°C
220-275°C
Bed temp
100°C
90-110°C
Enclosure needed
No
Recommended
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

Ultrafuse PA6 GF30

-

Massively stiffer/tougher/more heat & abrasion resistant than nylon

ASA

A

Acrylonitrile Styrene Acrylate

Excellent UV resistance (outdoors indefinitely), tough, matte surface

Detailed Comparison

Property
Ultrafuse PA6 GF30
ASA
Tier Rating
Tier null
Tier A
Family
Nylon (PA)
ASA
Nozzle Temp
270°C
220-275°C
Bed Temp
100°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Ultrafuse PA6 GF30 Strengths

  • Massively stiffer/tougher/more heat & abrasion resistant than nylon
  • Warping reduced enough to be fairly easy to print (with correct setup)
  • Viable alternative to machined aluminum for some parts

ASA Strengths

  • Excellent UV resistance (outdoors indefinitely), tough, matte surface
  • Less warping than ABS; low viscosity enables very high speed printing
  • High heat tolerance (~boiling water range)

Considerations

Ultrafuse PA6 GF30 Caveats

  • Higher print temps; hardware wear if not equipped

ASA Caveats

  • Still off-gasses; enclosure/ventilation recommended
  • Can still warp; needs tuning

Frequently Asked Questions

What is the difference between Ultrafuse PA6 GF30 and ASA?
Ultrafuse PA6 GF30 prints at 270°C nozzle / 100°C bed (No enclosure, low moisture sensitivity). ASA prints at 220-275°C nozzle / 90-110°C bed (Recommended enclosure, moderate moisture sensitivity).
Is Ultrafuse PA6 GF30 or ASA stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Ultrafuse PA6 GF30 is suited to massively stiffer/tougher/more heat & abrasion resistant than nylon, while ASA is suited to excellent uv resistance (outdoors indefinitely).
Which prints at a higher temperature, Ultrafuse PA6 GF30 or ASA?
Ultrafuse PA6 GF30 prints at a higher temperature (270°C nozzle vs 220-275°C for ASA).
Is Ultrafuse PA6 GF30 or ASA better for beginners?
Ultrafuse PA6 GF30 is better for beginners: enclosure is no and moisture sensitivity is low, vs recommended enclosure and moderate moisture for ASA.
Should I use Ultrafuse PA6 GF30 or ASA for outdoor use?
For outdoor use, ASA is usually the better fit (Excellent UV resistance (outdoors indefinitely)). Choose Ultrafuse PA6 GF30 instead when massively stiffer/tougher/more heat & abrasion resistant than nylon.

Other Popular Comparisons

PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG