Ultrafuse PP-GF30 vs ASA
Compare Ultrafuse PP-GF30 and ASA filaments side-by-side so you can pick the right one for your 3D printing project.
Ultrafuse PP-GF30
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Ultrafuse PP-GF30
ASA
Tier Rating
Tier null
Tier A
Family
PP
ASA
Nozzle Temp
250°C
220-275°C
Bed Temp
40°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Ultrafuse PP-GF30 Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Ultrafuse PP-GF30 Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Ultrafuse PP-GF30 or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Ultrafuse PP-GF30 (Tier null). However, the best choice depends on your specific needs: Ultrafuse PP-GF30 is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Ultrafuse PP-GF30 and ASA?
Ultrafuse PP-GF30 prints at 250°C nozzle / 40°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Ultrafuse PP-GF30 and ASA need an enclosure?
Ultrafuse PP-GF30: not needed. ASA: recommended.
Which is more beginner-friendly: Ultrafuse PP-GF30 or ASA?
Ultrafuse PP-GF30 is more beginner-friendly as it doesn't require an enclosure.