Ultrafuse PP-GF30 vs PETG

Compare Ultrafuse PP-GF30 and PETG filaments side-by-side so you can pick the right one for your 3D printing project.

Ultrafuse PP-GF30 vs PETG: Ultrafuse PP-GF30 is known for very tough, while PETG is known for tougher than pla. Ultrafuse PP-GF30 is easier to print; Ultrafuse PP-GF30 prints at higher nozzle temperatures (250°C vs 230-250°C). Choose Ultrafuse PP-GF30 for very tough, or PETG for tougher than pla.

Key differences at a glance

Property
Ultrafuse PP-GF30
PETG
Nozzle temp
250°C
230-250°C
Bed temp
40°C
70-90°C
Enclosure needed
No
Optional
Ease of printing
Easy
Moderate
Moisture sensitivity
low
moderate

Ultrafuse PP-GF30

-

Very tough, durable, all-weather, extremely lightweight

PETG

A

Polyethylene Terephthalate Glycol-modified

Tougher than PLA, higher temp tolerance, more durable in real-world use

Detailed Comparison

Property
Ultrafuse PP-GF30
PETG
Tier Rating
Tier null
Tier A
Family
PP
PETG
Nozzle Temp
250°C
230-250°C
Bed Temp
40°C
70-90°C
Enclosure
not needed
optional
Cooling
Moderate cooling; too much cooling can hurt layer adhesion
Moisture Sensitivity
low
moderate

Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.

Strengths Comparison

Ultrafuse PP-GF30 Strengths

  • Very tough, durable, all-weather, extremely lightweight
  • Industrial-relevant material properties

PETG Strengths

  • Tougher than PLA, higher temp tolerance, more durable in real-world use
  • Good clarity and low friction among easy-to-print materials

Considerations

Ultrafuse PP-GF30 Caveats

  • Even harder to print than PP; peels/curls more aggressively

PETG Caveats

  • Overhangs/bridges sag; supports can be hard to remove
  • Absorbs water fairly quickly

Frequently Asked Questions

What is the difference between Ultrafuse PP-GF30 and PETG?
Ultrafuse PP-GF30 prints at 250°C nozzle / 40°C bed (No enclosure, low moisture sensitivity). PETG prints at 230-250°C nozzle / 70-90°C bed (Optional enclosure, moderate moisture sensitivity).
Is Ultrafuse PP-GF30 or PETG stronger?
Our dataset does not include comparable tensile strength values for both. Qualitatively, Ultrafuse PP-GF30 is suited to very tough, while PETG is suited to tougher than pla.
Which prints at a higher temperature, Ultrafuse PP-GF30 or PETG?
Ultrafuse PP-GF30 prints at a higher temperature (250°C nozzle vs 230-250°C for PETG).
Is Ultrafuse PP-GF30 or PETG better for beginners?
Ultrafuse PP-GF30 is better for beginners: enclosure is no and moisture sensitivity is low, vs optional enclosure and moderate moisture for PETG.
Should I use Ultrafuse PP-GF30 or PETG for very tough?
For very tough, Ultrafuse PP-GF30 is usually the better fit (Very tough). Choose PETG instead when tougher than pla.

Other Popular Comparisons

PLA vs PETGPLA vs ABSPETG vs ABSPLA vs Tough PLAABS vs ASAASA vs PETG