Ultrafuse PP vs PLA
Compare Ultrafuse PP and PLA filaments side-by-side so you can pick the right one for your 3D printing project.
Ultrafuse PP vs PLA: Ultrafuse PP is known for very tough, while PLA is known for easiest to print. Both have no enclosure requirements; Ultrafuse PP is less moisture-sensitive; Ultrafuse PP prints at higher nozzle temperatures (240°C vs 190-220°C). Choose Ultrafuse PP for very tough, or PLA for easiest to print.
Key differences at a glance
Ultrafuse PP
-Very tough, durable, all-weather, extremely lightweight
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Green marks the generally easier or more forgiving option in that row, based on tier, enclosure needs, and moisture sensitivity. It is not always the better choice for a specific job, so weigh it against what your project actually needs.
Strengths Comparison
Ultrafuse PP Strengths
- Very tough, durable, all-weather, extremely lightweight
- Industrial-relevant material properties
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
Ultrafuse PP Caveats
- Even harder to print than PP; peels/curls more aggressively
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups