Prusament PETG Magnetite 40% Filament

-
Family:Specialty

Technical Data

Price Range
~$46.99/kgPremium

Hardware Requirements

Enclosure
Not Needed
Drybox
Not Needed
Hardened Nozzle
Not Needed

Bed Surface Compatibility

Textured PEI
Satin PEI
PA/Nylon Sheet
Polypropylene
Smooth PEI
High Temp

Hover over icons for details. Always use proper release agents when needed.

Physical Properties

Heat Deflection93 C
Impact Resistance60 kJ/m2
Tensile Strength47 MPa

Values may vary by brand and printing conditions.

Compatible Solvents

Dichlormethane

For smoothing, welding, or cleaning. Always use proper ventilation and safety equipment.

Frequently Asked Questions

What is Prusament PETG Magnetite 40% filament?
Prusament PETG Magnetite 40% (Specialty) is a 3D printing filament. It is used for various 3D printing applications.
What temperature should I print Prusament PETG Magnetite 40% at?
Prusament PETG Magnetite 40% typically prints at nozzle temperatures of 270°C and bed temperatures of 100°C. Adjust cooling based on your specific filament brand.
Do I need an enclosure to print Prusament PETG Magnetite 40%?
No enclosure is needed for printing Prusament PETG Magnetite 40%.