Ultrafuse PA6 GF30 Filament

-
Family:Nylon (PA)

Technical Data

Price Range
~$132.24/kgSpecialty

Hardware Requirements

Enclosure
Not Needed
Drybox
Not Needed
Hardened Nozzle
Not Needed

Bed Surface Compatibility

Textured PEI
Satin PEI
Smooth PEI
PA/Nylon Sheet
Polypropylene
High Temp

Hover over icons for details. Always use proper release agents when needed.

Physical Properties

Heat Deflection110 C
Impact Resistance39 kJ/m2
Tensile Strength78 MPa

Values may vary by brand and printing conditions.

Frequently Asked Questions

What is Ultrafuse PA6 GF30 filament?
Ultrafuse PA6 GF30 (Nylon (PA)) is a 3D printing filament. It is used for various 3D printing applications.
What temperature should I print Ultrafuse PA6 GF30 at?
Ultrafuse PA6 GF30 typically prints at nozzle temperatures of 270°C and bed temperatures of 100°C. Adjust cooling based on your specific filament brand.
Do I need an enclosure to print Ultrafuse PA6 GF30?
No enclosure is needed for printing Ultrafuse PA6 GF30.